"Mac Snow Leopard for PC's iATKOS_S3_v2.zip"
Download This Torrent
||Software > Windows
Confirmed Working: Mac SNOW LEOPARD FOR PC's
Use ULTRA ISO to open and burn image at slow speed (around 4x) .Use a -R DISK,Icouldn't get it to burn with a +R
ULTRA ISO is the only software I found that opened the full image properly for burning.
GUID Partition works very well
ASUS COMMANDO Motherboard
Pentium 4 3.8Ghz EM64T
4GB DDR2 Crucial Ballistix Ram
1GB DDR2 NVidia 9500GT
Creative Sound Blaster Audigy 2 se (not working,no kext available yet)
Replaced with an old C-Media card
Used kext helper B7 to install the driver from : http://www.kexts.com/
(CMI8738PCIAudioDriver kext )
Now I have fully working sound in/out and Mic .
SETTINGS I USED:
Boot loader - Use Chameleon v2 RC5 (uncheck all others)
Boot loader Options - 32bit boot
USB - usb fix
PATCHES -Extra directory (Uncheck this or it will not install )
- RTC-RTC (choose first one)
MODIFIED KERNELS - qoopz 10.3.0
MAIN HARDWARE - SATA/IDE - Intel SATA/IDE
UNCHECK THE SOUND ( Important ) It will not work with this checked.
You can load the driver kext for your card later manually with kext helper B7
NETWORK - Wired - Marvell - Marvell Yukon 88E8001
ANYTHING ELSE LEAVE AS IT IS.
It will update to 10.6.4 from combo update by going to the apple website and downloading from there.(you will need this before you can update to 10.6.5 )
NOTE :The 10.6.5 update knocks out the USB's Here's the Fix.
To update to 10.6.5 : Open Finder- Open your drive- Open System- Open Library- Open Extensions- find IOUSBFamily.kext and copy it to desktop.
Go to the Apple website support page and download and install the 10.6.5 update not the combo one. Do not reboot. Open kext helper b7 ,drag the IOUSB.kext and drop it in the box,hit easy install. reboot you should have no usb problem.
Reboot until the chameleon shows press f 8 choose the first apple and press the down arrow and choose to boot with -v or -f
Hope this helps a few people