Download This Torrent
||Software > Windows
Main component versions in the release:
ΓΓé¼ó DK2 Driver Version 07.14.0.25
ΓΓé¼ó Nokia Connectivity Cable USB Driver Version 220.127.116.11
ΓΓé¼ó Flash Update Package 10.50.00
ΓΓé¼ó FLS-x Drivers Version 2.09.28
ΓΓé¼ó FUSE Connection Manager v 2010.52
MAIN CHANGES & ERROR CORRECTIONS FROM PREVIOUS VERSION 2010.48.4.44602
New Products added
ΓΓé¼ó RM-732, RM-733, RM-713, RM-707
ΓΓé¼ó New Connectivity Cable deriver
ΓΓé¼ó New version of FUSE connection Manager
ΓΓé¼ó New version of Flash Update Package
ΓΓé¼ó New versions of Product API
ΓΓé¼ó CTRL+R and CTRL+S shortcuts corrected
ΓΓé¼ó All Nokia Service SOftware Applications will use following location for product specific data:
- Windows XP: C:\Documents and Settings\All Users\Application Data\Nokia\Packages
- Windows 7: C:\Program Data\Nokia\Packages
Error Corrections & changes
ΓΓé¼ó FLS-4 Support removed
ΓΓé¼ó Correction to Genius case #173131: Nokia 7020 Auto-tuning failed issue
ΓΓé¼ó Corrections to autotuning / certificate restoring in cases when flash / combo memory was been
replaced and security self tests were failing
ΓΓé¼ó New look & feel implemented to UI
ΓΓé¼ó This version contains the latest Tucson components. Therefore it is not necessary to use Tucson
Add-On Installation Packages
ΓΓé¼ó Before you start Phoenix or care Suite installation to Windows 7 the User Account Control (UAC)
should be turned off from Windows Control Panel settings.
ΓΓé¼ó For more information concerning new common data package location refer to separate documentation
in KICS information center
ΓΓé¼ó For more information concerning new options in ΓΓé¼┼ôFirmware UpdateΓΓé¼┬¥ ΓΓé¼ΓÇ£ menu, please refer to document
SR1313 in KICS information center.
Current options in Firmware Update UI:
- Refurbish: Software will be updated with required content files. User data will be deleted. It is
mandatory to have the content files installed on PC, otherwise Refurbishment process will be
terminated. Before refurbishing, ensure that you back up user data with PC Suite.
- Update Software: Updates software. User data will be preserved. Optional Content files are not
required because they are not programmed
- Reset Software: Updates software and resets settings to the factory defaults. Some user data can be
lost.Optional Content files are not required because they are not programmed
- Product Code changes for USB Only ΓΓé¼ΓÇ£ phones (RX-51, RM-596 etc) work only when used with FPS-21
Flash Prommer and USB connection from prommer rear panel to phone. Please select USB as Product
- Do not use Flash option simultaneously with product code change for USB Onbly phones, flash phone
separately with Firmware Update
- It is recommeneded to use FPS-21 flash prommer with TCPIP connection when refurbishing USB Only
- phones (RM-596 etc) due to mandatory optional MMC file size.
KNOWN ERRORS & LIMITATIONS
ΓΓé¼ó Software downgrade with Tucson system is only possible for BB 5.0 products supporting the Data
Package 2 concept.
ΓΓé¼ó Flashing with setup FLS-5, SS-46 and product specific adapter is not supported anymore
ΓΓé¼ó If you install old DCT-4 data packages, Flash Update Package File installation path may be wrong. This
is caused by very old DCT-4 data packages which contain Flash Update Package and overwrite current
information during installation. If you experience problems when updating FPS-x prommers, please
check that Phoenix ΓΓé¼┼ôPrommer maintenanceΓΓé¼┬¥ is looking for the files from the correct location which is
ΓΓé¼┼ôC:\Program Files\Common Files\Nokia\Tss\FlashΓΓé¼┬¥. If not, Phoenix will show error ΓΓé¼┼ôUpdate via ini ΓΓé¼ΓÇ£ file
failedΓΓé¼┬¥. In this case, select ΓΓé¼┼ôUpdateΓΓé¼┬¥ from that Phoenix ΓΓé¼┼ôPrommer maintenanceΓΓé¼┬¥ ΓΓé¼ΓÇ£ UI, browse to correct
directory and select ΓΓé¼┼ôfpsxupd.iniΓΓé¼┬¥ for all other prommers except the FPS-8.
ΓΓé¼ó Refurbishment flashing and product code change for RX-51 product requires SX-4 card to be available
ΓΓé¼ó FPS-21 flashing for RX-51 works only with TCPIP connection. FPS-21 prommer with new HW version
is needed to correct this, and it is estimated to be available by the end of 2010
ΓΓé¼ó Please refer to product specific documents and instructions concerning the limitations of the RX-51
ΓΓé¼ó RX-51 flashing does not work when CU-4 is used
ΓΓé¼ó RX-51 Product Code changes work only without FLASH option, please flash phone separately
ΓΓé¼ó When version 2010_12_8_42304 or newer with FUSE connection manager is installed on top of older
Phoenix versions, there may be an additional delay of several minutes when you start Phoenix for the
first time. Please wait patiently; Phoenix will start after configuration is finished.
ΓΓé¼ó When using Data Package download functions with online connection, download times may
occasionally be long. This is not caused by Phoenix (or Care Suite). The download speed from online
servers is occasionally is known to be slow, depending on how data is buffered on caching servers.
ΓΓé¼ó Note concerning the installation and use with Administrator and User rights
- If you install Phoenix, start Phoenix and configure connections from FUSE connection manager as
Administrator, you may not be able to start Phoenix after you log off and try to use Phoenix with User
ΓΓé¼ó If you experience the above mentioned problem:
- Log on as Administrator
- Deleted Fuse folder and its contents from: C:\Documents and Settings\All Users\Application
- After this FuseΓΓé¼Γäós connection list will be empty and it can be used directly with guest/admin rights.
- This has to be done only once.
ΓΓé¼ó After you close Phoenix, it may not restart. To rectify this:
- Use Windows Task Manager to manually shut down phoenix.exe and FuseService.exe processes, or
optionally restart your PC
ΓΓé¼ó Mass memory content file flashing does not work for all products over USB ΓΓé¼ΓÇ£ FPS-10 or FPS-21 Flash
Prommer must be used!
ΓΓé¼ó To be able to use the help files in Windows 7 you need to install Windows Help program
(WinHlp32.exe) for Windows 7. Ways to locate WinHlp32.exe:
- Start Phoenix with online connection to Internet, select ΓΓé¼┼ôHelpΓΓé¼┬¥ and ΓΓé¼┼ôPhoenix helpΓΓé¼┬¥. Click the
ΓΓé¼┼ôMicrosoft Help and SupportΓΓé¼┬¥ website link. Download WinHlp32 and install it.- Go to
http://www.microsoft.com (http://www.microsoft.com) . Type ΓΓé¼┼ôWinHlp32ΓΓé¼│ to ΓΓé¼┼ôSearch Microsoft.comΓΓé¼┬¥ ΓΓé¼ΓÇ£ field. Locate
Windows Help program (WinHlp32.exe) for Windows 7 and install it
ΓΓé¼ó When using flash prommers, only one connection type to one prommer is allowed. Please use either
NFPD USB or NFPD TCPIP connection to one prommer, not both connections to same prommer
Supported operating systems and user rights
ΓΓé¼ó Windows XP Service Pack 1 or higher
ΓΓé¼ó When installing Phoenix into Win XP you must have local admin rights.
ΓΓé¼ó When using in Win XP, user must have power user rights.
ΓΓé¼ó Windows 7 32 Bit version